Pulse is expanding their portfolio of high current, low DCR inductors used in single phase PoL and multi-phase buck converters to power processors, memory modules, FPGAs and ASICS in servers, datacenters, networking systems and graphics cards. The five new families provide lower core loss using the latest high frequency materials, reduced DCR, and higher…
Pulse expands its IATF product portfolio with the release of the automotive grade version of four of its popular push-pull transformer series. These transformers are matched to several available push-pull driver IC’s including TI’s SN650x series, to deliver up to 3W of power with insulation levels from functional to reinforced and up to 5.5KVrms galvanic…
Pulse is excited to announce the launch of the new PAC6006 series of Round Wire Coil common mode chokes which double the current density of existing industry solutions of similar size. The PAC6006 complements our higher power PA5140/41 series. The new product uses the low cost EP13 core shape to introduce a smaller platform size…
Pulse Electronics is excited to introduce a total of nine new series’ of automotive and commercial grade molded powder inductors. The PA540x, PA544x (commercial grade) and PM540x, PM544x (automotive grade) range in size from 3.7×3.4×1.2mm up to 14×12.8×3.5mm. These platforms add to Pulse’s already popular line of high efficiency power inductors. They are ideal for high current, non-isolated…
Common Mode Chokes are used in power supply circuits for filtering in a wide range of electronic products. Although ubiquitous, their function and basic operation is often poorly understood. In any modern electronic product, it is highly likely that several different voltages and power conversion circuits will be required for the device to function properly.…
Pulse Electronics, a Yageo company, continues the expansion of our composite core power inductor products adding three new platform sizes. These new products offer extremely high energy storage density 1300uJ/cm3, current ratings in excess of 57Apk and range in size from 4.3 x 4.3 x 3.1mm up to 17.8 x 16.8 x 8mm . Available…
Pulse Electronics has expanded it’s RF inductor range with a selection of high current, multi-layer constructed, SMD Chip Inductors in 0603, 0805 and 1008 sizes to complement the existing ceramic and ferrite RF wire wound inductor ranges. The new “CLH” series offer inductance values ranging from 470nH to 4.7uH, an inherently low DC resistance and…
Pulse Electronics continues to innovate and bring to market exciting new power magnetic products. Leveraging the research presented in our 2019 APEC paper “Power Transformer Core Optimization Enables Dramatically Increased Power Density” Pulse has released an improved DC/DC transformer series that maintains the industry standard footprint but doubles the component power density to over 11W/cm3. The…
The 5th generation of wireless technology, 5G, is set to revolutionize our networking systems by providing bigger channels for higher data speeds, lower latency for more responsiveness and the ability to connect to significantly more devices for sensors and smart devices. To enable these improvements 5G will operate in three different bands (low-band, mid-band and…
Since our inception, PulseLarsen has been committed to providing outstanding antenna products to customers around the world – antennas that deliver both in terms of power, reliability, and technology and in terms of durability, design, and economy. This is true of our full line of antennas, including our wide range of indoor antenna models. When it comes…
