Pulse Electronics launches an expanded selection of PulsejackTM, integrated connector modules (ICMs) that are ideal for use in the latest LTE and 5G Mobile Wireless Access Points (WAPs) and other Industrial and outdoor uses. These new additions expand, and complement, our current commercial grade 10Gigabit products allowing wider operating temperature requirements of -40 to +85°C and…
Announcing our latest range of 1×1 Fast Ethernet SMT ICM’s are designed to provide isolation and noise reduction in a single solution, operating with a wide range of industrial protocols.
The automotive industry is changing. In recent years, the process of building cars has shifted drastically. Today, we’re facing a new phenomenon: the connected car and Electric Vehicles. Consumers have begun to demand internet connectivity everywhere – including their cars. The driving force behind this development is single twisted pair Ethernet. The single twisted pair…
Pulse Electronics has expanded it’s RF inductor range with a selection of high current, multi-layer constructed, SMD Chip Inductors in 0603, 0805 and 1008 sizes to complement the existing ceramic and ferrite RF wire wound inductor ranges. The new “CLH” series offer inductance values ranging from 470nH to 4.7uH, an inherently low DC resistance and…
World leading LAN discrete supplier Pulse Electronics, a YAGEO group company, announces the launch of their latest HBxxxxHLT and HXBxxxxHLT range of discrete LAN components produced on highly automated, cost-effective Pulse manufacturing lines. The high level of automation enables scalability, repeatability and maintains the always exceptional Pulse component quality. Pulse’s decades of ethernet magnetic design…
The latest revision of the popular JD2/JXD2 family of top entry PulseJacks™ has been redesigned to comply with the most stringent RoHS and WEEE directives yet. This follows the ending of all the exemptions relating to lead (Pb) in components and sub-assemblies. Therefore, with ALL traces of lead (Pb) removed, the NEW JXD2-0ZxxNL range are…
Pulse Electronics has expanded their range of market leading PulsejackTM, integrated connector modules (ICMs) for high speed 10GBase-T over copper with the introduction of the JXT4- family. These latest additions are ideal for interfacing ruggedized Industrial, mobile 4G/5G and other outdoor high-speed computing equipment to backhaul servers and switches over Cat6 unshielded Cable. At just…
Learn more about using ethernet magnetics for improved industrial networking design, design challenges of industrial networks and how to increase bandwidth and reliability with this easy to read graphic. And learn even more by going here for design guides and more.
Power Line Transformers are traditionally associated with home networking and were used primarily for extending the reach of LAN connections from the central router or modem in the home office, without the need to add new wiring to the building. By removing the deployment of Cat5 cable to every room, and at sites where a…
Introducing our new series of wire-wound and multi-layer common mode chip chokes within our broad family of telecom chokes – ideal for high frequency differential line signal filtering.
