Pulse has expanded its range of surface mount current sense transformers (CST) with the launch of the PH9494 series. This 13x10x7.2mm EE8 platform extends the current carrying capability of our miniature CST product offering to 30A by implementing a very low DCR (0.35mOhm max) single turn primary winding . The series includes multiple secondary…
Pulse is expanding their portfolio of high current, low DCR inductors used in single phase PoL and multi-phase buck converters to power processors, memory modules, FPGAs and ASICS in servers, datacenters, networking systems and graphics cards. The five new families provide lower core loss using the latest high frequency materials, reduced DCR, and higher…
Pulse expands its IATF product portfolio with the release of the automotive grade version of four of its popular push-pull transformer series. These transformers are matched to several available push-pull driver IC’s including TI’s SN650x series, to deliver up to 3W of power with insulation levels from functional to reinforced and up to 5.5KVrms galvanic…
Pulse is excited to announce the launch of the new PAC6006 series of Round Wire Coil common mode chokes which double the current density of existing industry solutions of similar size. The PAC6006 complements our higher power PA5140/41 series. The new product uses the low cost EP13 core shape to introduce a smaller platform size…
Pulse Electronics is excited to introduce a total of nine new series’ of automotive and commercial grade molded powder inductors. The PA540x, PA544x (commercial grade) and PM540x, PM544x (automotive grade) range in size from 3.7×3.4×1.2mm up to 14×12.8×3.5mm. These platforms add to Pulse’s already popular line of high efficiency power inductors. They are ideal for high current, non-isolated…
Common Mode Chokes are used in power supply circuits for filtering in a wide range of electronic products. Although ubiquitous, their function and basic operation is often poorly understood. In any modern electronic product, it is highly likely that several different voltages and power conversion circuits will be required for the device to function properly.…
Pulse Electronics, a Yageo company, continues the expansion of our composite core power inductor products adding three new platform sizes. These new products offer extremely high energy storage density 1300uJ/cm3, current ratings in excess of 57Apk and range in size from 4.3 x 4.3 x 3.1mm up to 17.8 x 16.8 x 8mm . Available…
Pulse Electronics continues to innovate and bring to market exciting new power magnetic products. Leveraging the research presented in our 2019 APEC paper “Power Transformer Core Optimization Enables Dramatically Increased Power Density” Pulse has released an improved DC/DC transformer series that maintains the industry standard footprint but doubles the component power density to over 11W/cm3. The…
Pulse expands its range of power bead inductors with the introduction of six new platform sizes designed for the latest multi-phase and PoL architectures for server, graphics and high power FPGAs. The latest platforms have ultra-low DCR, low loss ferrite cores and an optimized structure to ensure that they offer the highest efficiency and enable…
In many modern systems there is a need to transmit both high speed data, as well as effectively distribute power, between remote devices. Due to its high-speed capabilities and robust communication protocols, Ethernet is often the communications protocol of choice. Many systems such as VoIP Phones, IP Cameras, Wireless Access Points, Intelligent Lighting Controllers or…
