Pulse Electronics launches a selection of pure right-angled, through hole reflow (THR) compatible RJ45 connectors in Latch /Tab-Up configuration. The new E5J88- series has a shallow depth from the edge of the PCB of just 15mm and when used with a standard industrial Ethernet transformer – like HX1188NL – also from Pulse, can vie for…
Pulse Electronics, a global leader in Ethernet Magnetics for LAN interface, has released their PulseChipTM 1Gigabit, 2.5Gigabit, 5Gigabit, and 10Gigabit single transformers to support standard and Power over Ethernet (PoE) applications for the commercial and industrial temperature rated environments. These new PulseChipTM transformers TC1000, TC1000P, TC2500, TC2500P, TC5000, TC5000P, TC10000, and TC10000P are being produced…
In the automotive networking world, new trends are evolving, and Automotive Ethernet is one of the indispensable technologies. Applications such as Advanced Driver Assist Systems (ADAS), Infotainment, Gateways, Body Control, Camera / Radar, and even Vehicle-To-X (V2X) communication are elements of future vehicles that are difficult to imagine without the latest generation of In-Vehicle…
Small Footprints that Packs a Punch
Pulse Electronics, a global leader in Ethernet Magnetics, has released their latest 1Gigabit magnetic module designs which support Power over Ethernet (PoE) for outdoor and industrial environments. Pulse has been integral in the development of PoE since the first standard, IEEE802.af, was released in 2003 and enabled 15W over two pair and has continued…
Power Line Transformers are traditionally associated with home networking and were used primarily for extending the reach of LAN connections from the central router or modem in the home office, without the need to add new wiring to the building. By removing the deployment of Cat5 cable to every room, and at sites where a…
Pulse Electronics has expanded it’s RF inductor range with a selection of high current, multi-layer constructed, SMD Chip Inductors in 0603, 0805 and 1008 sizes to complement the existing ceramic and ferrite RF wire wound inductor ranges. The new “CLH” series offer inductance values ranging from 470nH to 4.7uH, an inherently low DC resistance and…
Pulse Electronics Networking’s announces the release of the latest PulseJack® RJ45 range of ICM’s dedicated to supporting the Industrial Market while helping Engineers reduce processing costs by utilizing the advances in SMD with the ruggedness of THD. The new range consists of three different style, single port RJ45 connectors with integrated transformers. They have different…
The demand for higher bandwidth Wireless Access Points (WAPs) supporting LTE, 4G and the new emerging 5G Standards demands that the equipment must have higher data rate copper connectivity to avoid bottlenecks in data transmission. If it can also provide the power supply requirement via PoE – utilising the same UTP or STP cabling, then…
Pulse releases the AE3003 100Base-T1 PoDL common mode choke(CMC) for automotive Ethernet applications requiring power over the datalines on a single twisted pair wire. The AE3003 is the first 300mA single twisted pair PoDL part released to production. The AE3003 supports PoDL classes 0, 1, 2, 3, and 6, see PoDL class table below.
Learn more about using ethernet magnetics for improved industrial networking design, design challenges of industrial networks and how to increase bandwidth and reliability with this easy to read graphic. And learn even more by going here for design guides and more.
