For efficient wireless M2M connectivity in a small form factor

April 29, 2010 – Pulse Electronics, a worldwide leader in electronic component and subassembly design and manufacturing, introduces its new family of stubby external antennas. With an efficiency of more than 55% in all bands and a height of less than 50mm, Pulse’s antennas enable wireless devices to access the major cellular networks worldwide. They provide a reliable wireless machine-to-machine (M2M) connection in applications such as smart metering, monitoring, industrial controls, and data-logging.

The stubby antennas cover frequency bands 824-960 and 1710-1990 MHz for all widely used cellular bands for 2G, 2.5G and 3G applications. They have a peak gain of 1 dBi in the 824–960 MHz range, 2 dBi in the 1710–1990 MHz range, and 2.5 dBi in the 1920–2170 MHz range, with an impedance of 50 Ohms. Operating temperatures range from -40 to 85 degrees Celsius.

Pulse’s stubby cellular antennas come in two configurations. The W1900 and W1902 are straight antennas for connection to the top of a device or modem while the W1910 and W1911 have a right angle for a side connection. The W1910/11 is 49mm high and the W1900/02 is 49.5mm.

The peak radiated efficiency for Pulse’s stubby antennas ranges from 50% to 65%, which is the percentage of the original radio signal which is actually radiated from the antenna. The higher the efficiency, the less power is needed from the radio and the more economical the design. A lower efficiency antenna requires amplification which draws more current, thereby increasing energy consumption. Greater signal strength provides higher efficiency resulting in higher system integrity.

“This new family of stubby antennas is a great addition to the expanding Pulse M2M antenna range,” explained Elaine Baxter, marketing manager, Pulse Wireless Devices Antenna Division. “These cellular antennas are reliable and come in small form factors that enable companies to quickly bring their wireless M2M modems to market.”

Pulse’s stubby cellular antennas are packaged in quantities of 20 each. Antennas come standard with SMA male connectors and are available with SMA RP-male versions with additional connector options to follow. Pricing and lead times are available upon request. Additional information on these and other M2M external antenna products can be found on the Pulse website in the antenna application section.

About Pulse:

Pulse Electronics is a worldwide leader in the design, manufacturing, and subassembly sales of electronic components. Pulse products are used in the web infrastructure, computers, networking, communications, power conversion, defense and aerospace, automotive, and wireless industries. State-of-the-art custom designs and catalog products position Pulse as a complete source for electronic OEMs, contract manufacturers, and ODMs. Pulse is a participating member of IEEE, ATIS, ETSI, HDMI, the DSL Forum, CommNexus, and MoCA.

Cautionary Note: This message contains ‘forward looking statements’ within the meaning of the Private Securities Litigation Reform Act of 1995. Actual results may differ materially. This release should be read in conjunction with the factors set forth in Pulse Electronics’s report on Form 10-K for the year ended December 25, 2009 in Item 1a under the caption “Factors that May Affect Our Future Results (Cautionary Statements for Purposes of the ‘Safe Harbor’ Provisions of the Private Securities Litigation Reform Act of 1995).”

Facebooktwittergoogle_plusredditpinterestlinkedinmail