August 17, 2011 -- Pulse Electronics Corporation (NYSE: PULS), a leading
provider of electronic components, has collaborated with STMicroelectronics, one of the world’s largest semiconductor manufacturers and a leader in chips for smart metering, on research testing the accuracy of current sensing in metering applications. The application note, "Current sensing in metering applications using a Pulse Electronics current sensor and ST metering devices," is now available on the Pulse Electronics and STMicroelectronics websites.
The study tested STMicroelectronic’s STPMxx metering devices using several different current sensors. Pulse Electronics' di/dt current sensor, based on the Rogowski coil principle*, offered exceptional linearity over a wide current range. When used with STPMxx ICs, the accuracy of the meter is boosted, meeting the Class 0.2 S accuracy limits defined by the IEC 62053-22 meter standard for currents from 0.1 A to 200 A.
“STPMxx presents multiple benefits because of a proprietary power calculation and digital signal processing algorithm developed specifically for Rogowski coil-based sensors and the capability of mutual current compensation when multiple sensors are used,” explained Giuseppe Privitera, energy metering application manager, Industrial and Power Conversion Division, STMicroelectronics.
"While the Rogowski coil principle is well-known and has been widely implemented in various current sensing devices, the engineering challenge has been to control the winding characteristics to achieve the accurate current measurements required for metering applications," said Gerard Healy, field application engineer at Pulse Electronics Europe and co-author of the paper with Privitera. " Pulse Electronics has developed a precision winding technique that controls the parameters which directly influence the output voltage. A patent-pending segmented winding approach allows for a high number of winding turns per unit length to provide a sufficiently large output voltage for detection and integration. Pulse's winding configuration meets Class 1 requirements for immunity to external magnetic fields and an additional Faraday shield over the winding prevents electrostatic voltage coupling from the AC voltage of the conductor.”
The Pulse Electronics current sensor used in the study was the PA2999.006NL, which has now been replaced with the improved PA3202NL. The coil winding technique is implemented in this highly automatable, low-cost standard product which is lightweight and, due to the Rogowski coil as a voltage source, is a zero power-consumption device with a stable voltage over a wide temperature range. The Pulse current sensor was developed as an alternative to the current transformer typically used in metering applications.
The STPMxx is a family of energy metering ASSPs (application specific standard products) designed to address a wide range of electricity metering requirements thanks to built-in features including signal conditioning, signal processing, data conversion, input/output signals, and voltage reference. These devices are designed for effective measurement of active, reactive, and apparent energy in a single- or poly-phase system using Rogowski coil-based sensors, current transformers, or shunt sensors, and can be implemented as a single-chip energy meter or as a peripheral measurement system in a microcontroller-based energy meter.
The application note is available on the Pulse Electronics website at: http://www.pulseelectronics.com/sidewinder-p
The datasheet for the Pulse Electronics PA3202NL sensor can be found at: http://productfinder.pulseeng.com/product/PA3202NL
The STPMxx family information is at: http://www.st.com/stonline/stappl/productcatalog/app?page=productSelector&search=stpm
* The Rogowski coil principle states that an conductor carrying an AC current i(t) and passing through a helical coil, induces a voltage across the coil that is proportional to the rate of change of the current (di/dt) in the conductor.
About Pulse Electronics
Pulse Electronics is the electronic components partner that helps customers build the next great product by providing the needed technical solutions. Pulse Electronics has a long operating history of innovation in magnetics, antennas and connectors, as well as the ability to ramp quickly into high-quality, high-volume production. The Company serves the wireless and wireline communications, power management, military/aerospace and automotive industries. Pulse Electronics is a participating member of the IEEE, SFF, OIF, HDBaseT Alliance, CommNexus, and MoCA .
Cautionary Note: This press release contains statements that are "forward-looking" within the meaning of the Private Securities Litigation Reform Act of 1995 and involve a number of risks and uncertainties. These forward-looking statements are based on the Company's current information and expectations. There can be no assurance the forward-looking statements will be achieved. Actual results may differ materially due to the risk factors listed from time to time in the Company's SEC reports including, but not limited to, those discussed in the Company's Form 10-Q for the quarter ended July 1, 2011 in Item 1a under the caption "Factors That May Affect Our Future Results (Cautionary Statements for Purposes of the "Safe Harbor" Provisions of the Private Securities Litigation Reform Act of 1995)." All such risk factors are incorporated herein by reference as though set forth in full. The Company undertakes no obligation to update any forward looking statement.